Ningde power supply to complete the first robot paint sprayed insulating paint test
Time:2016-12-29Source:本站
"The use of robot insulation of the wire, not only can shorten the time of distribution network transformation, but also reduces the intensity of manual operation, an effective solution to some regional distribution network transformation and operation and maintenance of the puzzle.".. .A few days ago, Ningde power supply company production maintenance building site, an automatic spraying robot in the staff of the wireless remote control, slowly through the bare wire, then, insulating paint is evenly sprayed on the surface of the wire, a few minutes later, the whole Article bare conductor successfully completed the transformation of insulation, insulation test qualified.
It is understood that, over the years, substation exports of 10 kV line 2km insulation transformation, and housing trees adjacent to the local insulated wire insulation and other distribution network has been the problem of operation and maintenance. Previously, faced with such problems, the company can only rely on manual replacement of insulated wires. However, due to geographical location, the original tower of the force, green compensation, power outages and other factors, a considerable part of the region difficult to implement.
The robot paint sprayed insulating paint test is mainly the company's power distribution and inspection department for the current distribution network transformation and operation and maintenance of the existing problems and carry out, and the technical tests also belong to the national network system, the provincial company system for the first time. The technology uses a wireless remote control robot for spraying, through the insulating properties of high, inclusive, waterproof, weather resistant insulation coating installed in the robot, and the robot hanging above the wire, wireless control of its movement, the bare wire upgrade to insulation line.
Automatic coating of insulating paint robot has changed the traditional solution to the "insulation of the transformation" approach to achieve the workers in the ground can also be carried out bare wire insulation transformation, greatly solved the labor intensity of labor, power outages for a long time, transformation difficult And other issues, so as to achieve safe and efficient results, and the timely elimination of the existence of the security risks of the purpose, greatly improving the security level of distribution network operation. The next stage, the company will also be carried on the pilot wire.